can't restore db

[intheskin]

Hi,
I installed an Appliance (r8.0.1, g1.503.17b), it run ok but I can't restore my client database, it look like to me the disk is full (the inactive partition seem good)...
Does anyone have some suggestion?

Here is the restore output:

...
/DHS3dyn/afe/F_TRUNK
/DHS3dyn/afe/F_WALLDISP
/etc/TunParams.mao

gunzip: stdin: invalid compressed data--format violated
cpio: premature end of file

ERROR: Restoration failed

ERROR: a problem occured during data restoration
Press return

**************************************
* The restoration for mao, all files *
* failed, please retry *
**************************************

Press return

And the df output (before restoration):

(E)xa000000> ver2cho visible
(E)xa000000> df -v
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda5 155545 91782 55733 63% /
/dev/hda9 396623 352455 23687 94% /usr2
/dev/hda10 202220 137249 54531 72% /usr3
/dev/hda12 1881652 37940 1748128 3% /usr4
/dev/hda15 303344 41368 246315 15% /usr7
/dev/hda8 303344 3136 284547 2% /var
/dev/hda6 155545 18 147497 1% /root2_d
/dev/hda7 303344 13 287670 1% /var2
/dev/hda13 396623 13 376129 1% /usr5
/dev/hda14 202220 13 191767 1% /usr6
/dev/hda13 396623 13 376129 1% /root2_d/usr2
/dev/hda14 202220 13 191767 1% /root2_d/usr3
/dev/hda12 1881652 37940 1748128 3% /root2_d/usr4
/dev/hda15 303344 41368 246315 15% /root2_d/usr7
/dev/hda7 303344 13 287670 1% /root2_d/var
(E)xa000000>

[tot3nkopf]

It looks like your backup is corrupt, not a partition problem.

[intheskin]

I redone the backup item by item, and it is the same.
It did not explain either the fact that root, usr2 and 3 are full after a clean install...

[Gedeon]

Check that the backup file was transferred in binary mode with ftp client.
The archive is corrupted, bas transfer is the reason in many situation.

G.

[frank]

intheskin :

Did you let vmware chose the size of the HD or did you manually changed to 20 or more Gb ?

[intheskin]

Frank, I actually reduce the size to 6 Go... (instead of 8, I tried previously)! This should explain the heavy occupation of the disc.

I done correctly the saving in binary mode, and it work fine! I booted a media gateway on it and try IPphone and trunks, it work ok!

Thank you for your help!