Page 1 of 1
Setting smaller time for DISA response on OXO
Posted: 12 May 2009 02:50
by Shadow
Hello guys
It is posibile to set a small time for DISA response?.I want that the msg for DISA to enter after first ring not after the 3rd.
Thank you in advanced
Re: Setting smaller time for DISA response on OXO
Posted: 13 May 2009 07:42
by et
System Misc./ Memory R/W/ Other Labels/ DisaAnsTim by default 3C (hex) or 060 (dec) = 6 sec. Reduce it.
Re: Setting smaller time for DISA response on OXO
Posted: 14 May 2009 08:27
by Shadow
Hello
Thank you for your help .I guess this info is found in the doc right?
Maybe i didn`t try harder to find it
Re: Setting smaller time for DISA response on OXO
Posted: 11 Jun 2009 08:20
by Shadow
Hello
I try this but nothing happened.Still the welcome mesage for DISA enters after first 3 rings
I realy don`t know where to look now
Re: Setting smaller time for DISA response on OXO
Posted: 11 Jun 2009 13:34
by elkiwi
ADsaAnsTim: DISA on analogue trunk: Ring duration timer for automatic answer of an incoming call to DISA. Default value 64 Be carefull, 100 ms intervals. Source: Noteworthy addresses TC.
Re: Setting smaller time for DISA response on OXO
Posted: 13 Jul 2009 06:27
by Shadow
Hello
Thank you, this time was fine.DISA answers now after one ring.