Page 1 of 1
4760 on IP/X25 network
Posted: 09 May 2009 13:35
by abdulraouf
OmniVista R5 with OXE R9: cannot see the other nodes on the IP/X25 network ( NPRAE )
I,ve cofigured the static routes but still cant ping the remote node IP/X25 172.30.253.N from 4760 server
Re: 4760 on IP/X25 network
Posted: 13 May 2009 10:14
by mavijitr_DUP
This is the only information I have.. Possibily there may be a subnet mask issue.. check you subnet mask..
on the PC server 4760
do the following management
lets say node 1 is available via IP
node 2 is available through IP/X25
node 1 ip address is 10.1.1.1
node 2 IP/X25 address is 172.30.2.1
on the PC server
do
route add 172.30.2.1 MASK 255.255.255.255 10.1.1.1
then try to
telnet 172.30.2.1
(normally you should connect )
on the pc server, try also ping 10.1.1.1, ping 172.30.2.1
and on node 2 try to ping 10.1.1.1, ip address of the 4760 server , ...
if not there may be a problem in 4400 configuration
check your mask and if gated process is launch
if yes
delete the route
route delete 172.30.2.1
check 4760 management
you need to declare in 4760 for node 2
connection type IP/X25
Ip address = (172..30..2.1)
gateway link = you have to search the node 1 !!! by clicking on the field theon button [....] to search a pcx.