Alcatel OXe R8.0.1. and Asterisk connection with 4094Adapter
Posted: 02 Mar 2009 12:40
Good Afternoon All,
i have problem to connect Alcatel Oxe with Asterisk server with use 4094 S0 Adapter.
On board Asterisk I have ISDN card for 4 ( four ) ISDN connections.
If I connect directly ISDN card in Asterisk side to Public ISDN line with normal cable ( cat 5e ) and i call the public number, Asterisk answer without problems.
When i connect one ISDN access from Asterisk card to S0 adaptor 4094 ( it's work fine - i can read in service ) with use normal cable ( cat5e ) or cross cable for ISDN junction i dont work.
I create S0 and i assigned 293 internal number. When I try call with Primary access this internal number i hope that Asterisk answer, but the call is close.
Can you help me?
Best Regards
i have problem to connect Alcatel Oxe with Asterisk server with use 4094 S0 Adapter.
On board Asterisk I have ISDN card for 4 ( four ) ISDN connections.
If I connect directly ISDN card in Asterisk side to Public ISDN line with normal cable ( cat 5e ) and i call the public number, Asterisk answer without problems.
When i connect one ISDN access from Asterisk card to S0 adaptor 4094 ( it's work fine - i can read in service ) with use normal cable ( cat5e ) or cross cable for ISDN junction i dont work.
I create S0 and i assigned 293 internal number. When I try call with Primary access this internal number i hope that Asterisk answer, but the call is close.
Can you help me?
Best Regards