Page 1 of 1

diasable ack beep after transfer (UA)

Posted: 15 Jan 2009 10:49
by premger
Hello all together,

is it possible to turn off the beep“s after transfering a call to another extension via transfer key?

OXO rel 7.0 18.002

greetings from austria,
premger

Re: diasable ack beep after transfer (UA)

Posted: 21 Jan 2009 00:26
by aflores
Look up at the manual the I-Tones label and wich is the tone reproduced during the tranfer and try to change the values.

Be carefull, changind the I-Tones label ok, if you doit wrong, you may cause another tone malfuntion, so again, be carefull.

Regards

AFLORES