Alcatel Unleashed

Hi.

I have got following problem.

Phone_A------Asterisk(isdn)-------OXO(AA Menu)-----if pressed 1----Phone_B (IP4038)
------------------------------------------| if pressed 2
------------------------------------------|
---------------------------------------S0 Module------Phone_C (ISDN Phone)


When Phone_A press 1 then Phone_B see CLIP Phone_A

When Phone_A press 2 then Phone_C don’t see CLIP Phone_A.

What should I do configure to see CLIP Phone_A on Phone_C?

Regards, Pawel.

Don't know OXO that well, but
send proper CLIP from asterisk (TON, caller id in 'national' form) that is for start,
does Phone_C recognise CLIP of Phone_B (or/and any other external isdn trunk connected to oxo) ?
What traces are saying (R7 of oxo as i assume)?

If you stop being so shy guy i will gladly let you use some my lab equipment for asterisk (i got only E1 cards as now, 1, 4, Digium, OpenVox & 1,2,4,8 ports -- Sangoma, sorry no free equipment for S0/T0 connections... ).
C'mon, you live in same town Pawel.

type of internal OXO phone should not mater as ALU terminals series 9 or 8 work (after logging in) very much the same.