Page 1 of 1

Conference on 2lines Panasonic analog phone

Posted: 02 Sep 2004 00:33
by Vnbadiger
Hello
I have recent install Omnipcx 4400, earilier the same client was using 4200 pcx of alcatel.
They are using Panasonics dual line analog set, on that they have one analog extn. and on other line an analog trunk line directly connected on their set.During conversation if they want to have conf with internal party or external party, they used press the conf. key on the set dial the number have conference between them.( This was happening on 4200 pbx)
When upgraded to 4400,I can put the parties in conf. but the speech bet. all three party is not happening is their any parameter to modified so that I will be able do so.
As far I feel, if this kind of facilities happen on 4200 switch then definitly it should happen on 4400 switch.
All suggestion and views are welcome but do reply.

Thank you

Vnbadiger(Vasant)

Re: Conference on 2lines Panasonic analog phone

Posted: 08 Sep 2004 15:59
by frank
Vnbadiger wrote:Hello
(...)
When upgraded to 4400,I can put the parties in conf. but the speech bet. all three party is not happening is their any parameter to modified so that I will be able do so.
(...)
Vnbadiger(Vasant)
What did you mean by "the speech bet." ?

Re: Conference on 2lines Panasonic analog phone

Posted: 08 Sep 2004 16:34
by alex
frank wrote:
What did you mean by "the speech bet." ?
I bet, by "bet." he meant "between" :)

Posted: 08 Sep 2004 22:28
by frank
Ok.
Then for the 3 partis conferences, you need a GPA board I think ?
I don't even know those stuff by heart now, almost all systems come with a GPA and the 3-parties-conf works anyway :-)

So, do you have a GPA board ?

Posted: 09 Sep 2004 12:47
by alex
frank wrote:Ok.
Then for the 3 partis conferences, you need a GPA board I think ?
I don't even know those stuff by heart now, almost all systems come with a GPA and the 3-parties-conf works anyway :-)

So, do you have a GPA board ?
No way.
By default, 3-way conference is supported on any DHS3 interface - due to UA -3B+D interface.That means no additional equipment is needed.
You need GPA (or GPA2) for casual conference (6+) or for 29-parties confrerence(master conference)
This case mainly concerns Panasonic - it's his job to "bridge" thi interfaces.

Conferencing

Posted: 17 Sep 2004 19:24
by mmosende
I thinkk tahts right GPA card is neded" but i have a question regarding conference' how do i in eble the 29 lines conferencing us of now up to 3 lines only i can used, but i need more of 3, help me







MAR
Pilphines