Alcatel Unleashed

hi,

how do i configure internal user to call the ccd pilot number without go thru the ISDN trunk.

problem
1) when the user dials the pilot number directly. the digital phone shows authorised. But if the user dials a trunk seizure follow by the pilot number, it would work.


can someone help to advise how to let the internal user dials the pilot number without going thru the trunk.

thanks

You need to create local hybrid loop.

1st. Create a logical link

Inter-Nodes Links / Logical Links (ABC-F)
Link Name : Loop
Link Type + Hybrid
Adjacent Node : 1 /*same node number as your PCX*/
Adjacent Network : 10 /*any network number you don't use except #15*/
…
Multi access hybrid link + YES

2nd. Create 2 accesses in this logical link

Inter-Nodes Links / Logical Links (ABC-F) / Hybrid Link Access
Link Name : Loop
Access number : 1
Signaling type + B Channel

Inter-Nodes Links / Logical Links (ABC-F) / Hybrid Link Access
Link Name : Loop
Access number : 2
Signaling type + B Channel

3d. To bring hybrid loop up you can try and reset it (rsthyb –f all ) or reboot the system.
Check if link is up with "hybvisu -f all"

Hope it helps,

Iouri

may i know where did u find the configuration of this.

is it from the technical documentation or is it from the training notes or some other place. please share with me where is the source of information. many thanks

when trying to create the second access. i got this error. no error when i create the first access

??Create: Hybrid Link Access????????????????????????????????????
? ?
? Node Number (reserved) : 1 ?
? Instance (reserved) : 1 ?
? Link Name : Loop ?
? Access number : 2 ?
? ?
? Signaling type + B Channel ?
? Main established tempo : 30 ?
? Has StandBy Signaling + False ?
? StandBy Signaling Type + Unused ?
? Network Date Time Update + NO ?
? ?
????????????????????????????????????????????????????????????????


??Error:????????????????????????????????????????????
? ?
? CANCEL to close this window ?
? ?
? Processing Failure ?
? OBJECT -1: Access number: No fict. trunk ID free ?
? ?
????????????????????????????????????????????????????

Go /usr3/mao
Use utility cfgUpdate
change #5 (Trunks). 2 accesses = 60 trunks, so add 60 to the Value that is now in your System.
reboot system

May Help !

I hope that you are working on release 5.0 or more. If you are working less then in does not work ( I may be wrong but I tried that in 3.2 and it didn't work )

Thanks Louri, that was the solution.

You rocks ...


/S

It is on the basic documentation....

Hi

I'm trying to create a logical hybride loop but the its giving an error (access denied)

Can someone help me on that?

Thks!!

Licenses?