Page 1 of 2
Posted: 14 Nov 2005 22:50
by vad
Check with command "mao", broadcast must be "on".
System/broadcast/broadcast object - check for neaded object you have "broadcast over the network" and "always taken in account".
Command "prog_diff" - may be you have many ERRLOG files.
Next - command "cleanbroad" (for hole network).
Posted: 15 Nov 2005 00:37
by frank
actually, i think it's
cleanbroad all
or cleanbroad -all
i don t have a lab here, and i don t remember by heart.
most of the time, if a node is not broadcasting anymore, it's because it had been disconnected somehow from the abc-f network . a 'cleanbroad all' followed by an audit shoud fix this
Posted: 15 Nov 2005 07:49
by vad
System/broadcast - you must have operational=yes.
System/broadcast/broadcast object - behaviour- broadcast over the network and alwayse take into account.
Posted: 16 Nov 2005 03:27
by vad
if it possible - restart PBX.
Posted: 17 Nov 2005 22:35
by vad
bascul and restart are not the same.
Posted: 18 Nov 2005 09:31
by iourid
From R6.1, the IP/X25 tunnel must be used when one of the nodes, interconnected by the hybrid logical link, is a node with duplicated Call Server and both Call Servers on two different IP subnetworks.
You can check it under X25/Network nodes.
Thanks much,
Iouri