Page 1 of 1
represent
Posted: 03 Aug 2005 19:09
by frank
I just leaned that new one
represent gives a list of the demi-com (half-com) actually in use.
You will see who is calling who. Then use eqstat n xxxxx to find who's the number calling/called
Posted: 04 Aug 2005 13:22
by la_toupie
It's the same thing ''listincall'', isn't it ?
Posted: 04 Aug 2005 13:43
by frank
listincall gives you too much shit
represent is much more clearer
Just a personal choice
Posted: 05 Aug 2005 12:22
by arctus
I mostly use "t3 |grep _NUMBER" to trace calls in real time. You can even trace digits as they are being typed into the set! I will also try "represent" and see what it can do for me.
Posted: 05 Aug 2005 13:06
by frank
You can see digits are they are dialed ONLY if you use NO OVERLAP I think. If you use Overlap, the PBX will send all at once..
Posted: 17 Oct 2005 04:20
by Alejandro
How to stop command "t3 |grep _NUMBER"?
tia
Posted: 17 Oct 2005 07:42
by vad
"DEL" or "CTRL-C"
Posted: 17 Oct 2005 12:31
by Alejandro
Thanks, vad.
"DEL" worked fine, but not "CTRL-C".
Thanks again.
Posted: 17 Oct 2005 23:16
by vad
DEL for Chorus (up to R50.1Ux), Ctrl-C for Linux (from R5.0Lx).