How to convert a switchport to UNP port on OS6900-X72
Posted: 16 Jul 2024 16:44
Hi,
First time Omniswitch user here as I more familiar with cisco, I encountered this issue when we try to configure 802.1x on of our port. Tried to read the manual but everytime i run this commane "unp port 1/1/42 admin-state enable" i get an error "Port 1/1/42 is not a UNP port". Below is the version of our switch. Hoping someone can help me out. Thank you
MLD-Omni6900 show system
System:
Description: Alcatel-Lucent Enterprise OS6900-X72 8.7.252.R02 GA, March 22, 2021.,
Object ID: 1.3.6.1.4.1.6486.801.1.1.2.1.10.1.6,
First time Omniswitch user here as I more familiar with cisco, I encountered this issue when we try to configure 802.1x on of our port. Tried to read the manual but everytime i run this commane "unp port 1/1/42 admin-state enable" i get an error "Port 1/1/42 is not a UNP port". Below is the version of our switch. Hoping someone can help me out. Thank you
MLD-Omni6900 show system
System:
Description: Alcatel-Lucent Enterprise OS6900-X72 8.7.252.R02 GA, March 22, 2021.,
Object ID: 1.3.6.1.4.1.6486.801.1.1.2.1.10.1.6,