Alcatel Unleashed

Hi All

OXO Rel 6. Trunk Group 0 = 3 x BRI, Trunk Group 460 = 2 x PSTN. The PSTN trunks are GSM Gateways. ARS is configured to route calls to fleet mobile phones via Trunk Group 460. All other calls go via Trunk Group 0. We need to have the public number of the first GSM gateway appear as the CLIP for calls going out via Trunk Group 460, and have the installation number (public number of the first channel of the first BRI) go out as the CLIP for calls on Trunk Group 0. CLIP on Trunk group 0 is not a problem, but can I have an alternative CLIP appear for Tunk Group 460 as well ?

Thanks in advance if anyone can help ...

The only number that will ever display from a GSM Pod is the number that made the call (ie the sim that got used for that call)

This can not be changed, atleast in Aus.

For your other calls, just set the CLIP in installation number to what ever u would like. (It must be a phsyical number on the system)

Correct for the GSM's however an eaiser way to have the BRI's outgoing clip the same is to rin the carrier and ask for that CLI be presented on all outgoing calls.