Transfer pcap file from INTIP Board

[simen929]

Hello,

I'm troubleshooting an issue where there sometimes is no sound on transferred calls on customers PBX.
In this matter I've done some pcap logging on the intip board, as well as the CPU.
Im having troubles transferring the pcap files from intip board to the CPU.

Any tips on how to do this?
If i try tftp by commandline I get file not found. If I try using tftpd64 I get error

The file is indeed there with correct path!

Any suggestions?

[haroun]

hi
try this
For INTIP
1) Use 'tftp' from the node's CS to the INTIP
enable binary mode
use the 'get' command to get file

e.g. :
(20)xa000020> tftp 172.19.14.175
tftp>
tftp> bin
tftp> get TdmIn_buf05


(B) For GD
1) Telnet to the GD console.
2) Change directory to /var/log
3) FTP the file to the CS (use the 'put' command)


ftp the captures from the CS to your PC.

[simen929]

Thank you for the reply!

However, it does not seem to work.
Logged in as root on both sides, still get file not found.

CS board on left side, INTIP board on right side.

Also tried syntax get IP_OF_INTIP:filename

[haroun]

when connected ARE u in the good path ?
dir