SOLUTION:
Use TFTP server - IP address (for example) 192.168.0.10
Create blank text file called "config.cfg" in the TFTP root folder
Connect MGMT port to TFTP server (MGMT port IP will be assigned shortly)
INTERRUPT THE BOOT PROCESS:
Hit a key within 3 seconds to change boot parameters…
Type "sros" and hit ENTER within 29 seconds to begin changing parameters: sros
You must supply some required Boot Options. At any prompt, you can type:
"restart" - restart the query mode.
"reboot" - reboot.
"exit" - boot with existing values.
Press ENTER to begin, or 'flash' to enter firmware update… <ENTER>
Software Location
-----------------
You must enter the URL of the TiMOS software.
The location can be on a Compact Flash device,
or on the network.
Here are some examples
cf3:/timos1.0R1
ftp://user:passwd@192.168.1.150/./timos1.0R1
ftp://user:passwd@[3FFE::1]/./timos1.0R1
tftp://192.168.1.150/./timos1.0R1
tftp://[3FFE::1]/./timos1.0R1
The existing Image URL is 'cf3:\TiMOS-B-8.0.R10'
Press ENTER to keep it.
Software Image URL: <ENTER>
Using: 'cf3:\TiMOS-B-8.0.R10'
Auto-Discovery
--------------
This system is equipped with TiMOS
Auto-Discovery.
Would you like to enable auto-discovery? (yes/no) no
SET CONFIG FILE LOCATION AS TFTP ROOT FOLDER:
Configuration File Location
---------------------------
You must enter the location of configuration
file to be used by TiMOS. The file can be on
a Compact Flash device, or on the network.
Here are some examples
cf1:/config.cfg
ftp://user:passwd@192.168.1.150/./config.cfg
ftp://user:passwd@[3FFE::1]/./config.cfg
tftp://192.168.1.150/./config.cfg
tftp://[3FFE::1]/./config.cfg
Config File URL: tftp://192.168.0.10/config.cfg
CONFIGURE MGMT PORT IP ADDRESS:
Network Configuration
---------------------
You specified a network location for either the
software or the configuration file. You need to
assign an IP(v6) address for this system.
The IP address should be entered in standard
dotted decimal form with a network length.
example: 192.168.1.169/24
Enter Active IP Address (Type 0 if none desired): 192.168.0.11/24
In case of an IPv6, the IPv6 address should be
entered in standard colon hexadecimal notation
with a prefix length.
example: 3FFE::1/112
Enter Active IPv6 Address (Type 0 if none desired): 0
No Active IPv6 Address configured
Would you like to add a static route? (yes/no) no
The existing fips-140-2 configuration is : 'no fips-140-2'
If you would like to change it please enter 'fips-140-2' followed by ENTER
or press ENTER to keep existing fips configuration <ENTER>
New Settings
------------
primary-image cf3:\TiMOS-B-8.0.R10
primary-config tftp://192.168.0.10/config.cfg
secondary-image cf3:\7705-TiMOS-6.0.R4
secondary-config cf3:\7705-TiMOS-6.0.R4\config.cfg
address 192.168.0.11/24 active
autonegotiate
duplex full
speed 100
wait 3
persist on
no fips-140-2
console-speed 115200
Do you want to overwrite cf3:/bof.cfg with the new settings? (yes/no): yes
Login with admin/admin
Delete old config files and edit bof.cfg with the vi editor