Page 1 of 1
ALE-20 Configuration with OXE 12.4 Set Type
Posted: 08 Aug 2022 10:53
by UP82
Good morning,
i'm trying to configuring IP Phone ALE-20 with OXE 12.4 MD10,
which Set Type should i use? It seems missing from the choises
Thanks a lot
BR
P.
Re: ALE-20 Configuration with OXE 12.4 Set Type
Posted: 08 Aug 2022 11:33
by haroun
hi
did you tried as8088 or the last digital set 9 series type ?
what about sip extension or device ?
Re: ALE-20 Configuration with OXE 12.4 Set Type
Posted: 08 Aug 2022 11:40
by sadim
You should configure it as 8028s
Re: ALE-20 Configuration with OXE 12.4 Set Type
Posted: 08 Aug 2022 11:43
by haroun
yes as ip phone cuze ale 20 IN NOT A HYBRID SET and accepts only ip Noe
Re: ALE-20 Configuration with OXE 12.4 Set Type
Posted: 08 Aug 2022 11:55
by sadim
Hi,
Regardless of all the comments that can be made around this topic, what is certain is: TC2961:
"Retro-Compatibility with OXE 12.4
• IP DeskPhones: retro-compatibility with OXE R12.4 MD6
• ALE-20, ALE-20h IP and ALE-30h IP seen respectively as 8028s, 8028s and 8068s "
Re: ALE-20 Configuration with OXE 12.4 Set Type
Posted: 08 Aug 2022 20:01
by oldboy
Correct you need to Patch to Min MD6 for it to run with correct Binaries
Re: ALE-20 Configuration with OXE 12.4 Set Type
Posted: 09 Aug 2022 04:31
by UP82
Thanks a lot,
8028s works fine
Paolo