OmniVista NMS Enterprise R4.5 R03 Installation Guide
Posted: 20 Jun 2021 03:51
To whom it may concern,
Good day to you!
I am seeking some support, advice and guidance for the installation of OmniVista NMS Enterprise R4.5 R03 to 2 Dell PowerEdge R470 Servers with Windows 2019 Server (Standard) Operating System.
I have two Physical Servers because the NMS Set-up requires High-Availability (HA) Installation.
My total number of AP (OAW-AP1361-RW) is 25 Nos. APs will be connected to the OS6465-P6. This Project is for Public Wi-Fi System.
My first question is: Does the latest version of OV 2500 R4.5 R03 does not support Deploying the Virtual Appliance in Virtual Box?
If it is not supported, should I use VMware ESXi or Hyper-V 2019?
PS. I have some knowledge in configuring Alcatel Switches but on this other Product of Alcatel-Lucent, I have zero knowledge. Please bear with my question and future questions on this topic.
Looking forward to your response and support.
Thank you and have a nice day!
Warm regards,
Mark
Good day to you!
I am seeking some support, advice and guidance for the installation of OmniVista NMS Enterprise R4.5 R03 to 2 Dell PowerEdge R470 Servers with Windows 2019 Server (Standard) Operating System.
I have two Physical Servers because the NMS Set-up requires High-Availability (HA) Installation.
My total number of AP (OAW-AP1361-RW) is 25 Nos. APs will be connected to the OS6465-P6. This Project is for Public Wi-Fi System.
My first question is: Does the latest version of OV 2500 R4.5 R03 does not support Deploying the Virtual Appliance in Virtual Box?
If it is not supported, should I use VMware ESXi or Hyper-V 2019?
PS. I have some knowledge in configuring Alcatel Switches but on this other Product of Alcatel-Lucent, I have zero knowledge. Please bear with my question and future questions on this topic.
Looking forward to your response and support.
Thank you and have a nice day!
Warm regards,
Mark