GD-3 BOOTING ISSUE

Post Reply
User avatar
aflores
Member
Posts: 239
Joined: 02 Oct 2007 12:33
Location: Caracas
Contact:

GD-3 BOOTING ISSUE

Post by aflores »

Hello all, hope everybody is fine.

I´m trying to re-install binaries on a GD3 but a few secons after enter to the Bios I got this mesaage:

"Booting suspended because of shutdown request or lack of main power"

I will like to know if some of you had faces this issue and could solved?

The main power is fine.

I did some test with an a OXO CPU (since it have to placed in the same slot) and its works fine so I think there is no trouble with the main power supply.

Any help/ideas to solve this will be appreciated.

Another question: Can a GD-3 be installed on a M cabinet (just for testing) I wan to be sure that a GD3 can be conected to an M cabinet and wont be got damaged.

Regards.

AFLORES
_________________________________________________
Nobody is so wise that needs no help, no one is so ignorant as not to deserve it.

Post Reply

Return to “Boards”