Page 1 of 1
Find Out Free UA/Z On 4400
Posted: 05 Nov 2007 21:20
by Jigger
Hey Lads,
Figured I should post in here.. easy question
Ive been thrown a job to find out the free ports in a 4400..
I have gone in through the mgr command, gone into spadmin but when i check the active file it dosnt really explain how many in use to how many are free.
I believe im only a command or two off what i need. Cheers guys
Re: Find Out Free UA/Z On 4400
Posted: 05 Nov 2007 22:01
by cavagnaro
mgr/system/go down hierarchy/
Free Addresses
Free Directory Numbers
Re: Find Out Free UA/Z On 4400
Posted: 05 Nov 2007 22:44
by Jigger
Sorry, my post has made me into a liar.
I actually need to know
UA Limit
UA In Service (Found that one)
Z Limit
Z In Service (Dont believe it is possible, can you confirm?)
Your post has shown me the UA in service i believe.
Cheers
Re: Find Out Free UA/Z On 4400
Posted: 06 Nov 2007 01:15
by cavagnaro
Nop, i showed you the free shelf-slot-port (unconfigured) you have on your system.
For what you want:
Limit of UA (i image you mean how many UA you can have):
config all |grep UA
count them and do the sum
config all |grep Z
count them and do the sum
listerm <Crystal > <Coupler>
Will show you status and number of the extensions on that board
Re: Find Out Free UA/Z On 4400
Posted: 06 Nov 2007 23:54
by Jigger
Legend mate, worked a treat.
Re: Find Out Free UA/Z On 4400
Posted: 07 Nov 2007 07:59
by vad
spadmin, menu 2 and 1 - you can find opened and used licences.
Re: Find Out Free UA/Z On 4400
Posted: 07 Nov 2007 17:26
by torrentula
spadmin, menu 2 and 1 - you can find opened and used licences.
Don't always trust the used numbers in that menu, it is not always correct.
Re: Find Out Free UA/Z On 4400
Posted: 08 Nov 2007 04:29
by vad
For user counter - no problem (usually).
