Page 1 of 1
OXE CS rebuild issue
Posted: 05 Jan 2020 21:35
by jthree
i have a issue with a OXE machine and need to rebuild CS with release 9.1
on HP laptop windows 10 , I run xp virtual machine.
install installer 2.24
setup connect on CS and laptop
disable firewall and antivirus
change boot option from CS to boot from ethernet
manage to connect to CS with MAC and auto allocate ip for cs but unable to rebuild.
ERROR : PXE-32 tftp timeout
Re: OXE CS rebuild issue
Posted: 07 Jan 2020 11:30
by frank
Did you connect the PC Directly to the Ethernet port of the CS ?
Re: OXE CS rebuild issue
Posted: 08 Jan 2020 16:07
by jthree
yes
Re: OXE CS rebuild issue
Posted: 08 Jan 2020 18:37
by oldboy
Sounds like a VM issue what have you set the Network to on the VM itself
Re: OXE CS rebuild issue
Posted: 08 Jan 2020 19:44
by frank
Oh yeah I did not pay attention. Why are you running it in a VM ? That never worked for me.
Re: OXE CS rebuild issue
Posted: 08 Jan 2020 20:00
by oldboy
frank wrote: ↑08 Jan 2020 19:44
Oh yeah I did not pay attention. Why are you running it in a VM ? That never worked for me.
PCInstaller no work in Windows 10 i would suggest, could use SOT
Re: OXE CS rebuild issue
Posted: 09 Jan 2020 10:06
by frank
PCInstaller no work in Windows 10 i would suggest, could use SOT
SOT does not work for CS. At least it was never tested.
Maybe the other one, I forgot the name. ALE Deployment Tool that was in between PCInstaller and SOT ?
Re: OXE CS rebuild issue
Posted: 09 Jan 2020 18:07
by jthree
old boy
network on vm adapter 1
network adapter - enable
attached to : bridge
name : intel (r) ethernet connection (4) 1219-lm
advanced
adapter typr : PCnet-FAST 111(Am79c973)
promisscuous mode :allow all
mac address
cable connected : tick