Enable SSHv2
Posted: 12 Dec 2019 05:27
Hi all,
I'm wondering if someone could help me. I'm trying to enable SSHv2 on OXE R12.3 and found in the forum a way to first generate OXE host keys for both CPU's and then generate custom keys on the Main and then you can use the oxe-copy-ssh-id command which works OK.
Once this is done I activate the same keys back on the Main CPU and checked in Netadmin that both are using custom keys for SSHv2.
However a few minutes later I get the following error in the incidents;
2679=CMIS err rcp EFD on stand-by CPU: appli CMISE err 0
I am then unable to ssh over from the Main to the Standby so I have to revert back to SSHv1.
Does anyone know the correct method on how to do this? The Security documentation is pretty basic.
Thanks all!
I'm wondering if someone could help me. I'm trying to enable SSHv2 on OXE R12.3 and found in the forum a way to first generate OXE host keys for both CPU's and then generate custom keys on the Main and then you can use the oxe-copy-ssh-id command which works OK.
Once this is done I activate the same keys back on the Main CPU and checked in Netadmin that both are using custom keys for SSHv2.
However a few minutes later I get the following error in the incidents;
2679=CMIS err rcp EFD on stand-by CPU: appli CMISE err 0
I am then unable to ssh over from the Main to the Standby so I have to revert back to SSHv1.
Does anyone know the correct method on how to do this? The Security documentation is pretty basic.
Thanks all!