8001 not initializing
-
- Member
- Posts: 19
- Joined: 14 Dec 2012 17:20
8001 not initializing
Hi all, I have some Alcatel8001 phones connected to OXO connect, one of them doesn´t want to boot and stays in "Initializing" phase. I tried to plug it to PoE ethernet port, plug to 5V adapter, plug to adapter 5V without network, nothing helped to start this phone. Is there any chance to boot it from USB for example? Last FW version in phone was V4.2.0.7 11505.
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 3
- Joined: 09 Oct 2018 16:33
Re: 8001 not initializing
Hi!
Are you Trying to flash the phone?
If you have access to Alcatel Bussines Portal on Technical Knowledge Center, you may want to see the article titled "8001 desk phone stuck at initializing and not booting"...
https://alcatel-lucent-enterprise.secur ... nel%208001
Regards!
Are you Trying to flash the phone?
If you have access to Alcatel Bussines Portal on Technical Knowledge Center, you may want to see the article titled "8001 desk phone stuck at initializing and not booting"...
https://alcatel-lucent-enterprise.secur ... nel%208001
Regards!
-
- Member
- Posts: 19
- Joined: 14 Dec 2012 17:20
Re: 8001 not initializing
Hi Vappleyard, I have access to ALE but link which you put here opens only main ALE web page and I couldn´t find it by name of file, can you send me the file?
Re: 8001 not initializing
Hi,
I have the same problem with 13 8001G SIP phone and the link above it doesn't work.
any help please ?
I have the same problem with 13 8001G SIP phone and the link above it doesn't work.
any help please ?
Re: 8001 not initializing
Hi,
I have same issue with lots of units 8001G.more units are going down as days pass by. Has anybody been able to figure out any solution for this issue?
Thanks & regards
Arfath
I have same issue with lots of units 8001G.more units are going down as days pass by. Has anybody been able to figure out any solution for this issue?
Thanks & regards
Arfath
Re: 8001 not initializing
Hi,
I have the same problem. I have two 8001. Any solution?
Thanks
I have the same problem. I have two 8001. Any solution?
Thanks
Re: 8001 not initializing
Anyone find a solution for this? PLEASE HELP
Re: 8001 not initializing
Tried the POE injector and was able to save some phones but still quite a lot not working!
-
- Member
- Posts: 1
- Joined: 20 Mar 2022 03:22
Re: 8001 not initializing
Hi,
I have the same problem. I have two 8001. Any solution?
Thanks
I have the same problem. I have two 8001. Any solution?
Thanks
Re: 8001 not initializing
These are dead zombies. no solution.
PoE injectors could save about 2% of these phones.
PoE injectors could save about 2% of these phones.