Page 1 of 1

OmniSwitch 6350 troubleshooting

Posted: 10 Nov 2019 08:30
by daghaghmeh
I'm facing an issue for multiple sites that use the same topology for the wifi projects, the site becomes down every 6 to 24 hours and the main switch is working and the port that connected to the backhaul is up, I just reset the port by this below command then the problem will be solved

interface 1/9 admin down
interface 1/9 admin up

however this solution is temporary, I need your support for a permanent solution

Re: OmniSwitch 6350 troubleshooting

Posted: 13 Nov 2019 13:15
by silvio
check the swlog. Is this the actual sw-release (show microcode, show hardware info? Maybe there was a known issue.
regards
SIlvio