Hello all. I hope everybody are fine as yours family too.
Does any one find a solution to this issue? I am facing this trouble at this moment. As already mentionet by other guys, the Procedure of Instaling-Formatind the release with PC instaler goes fine but after everything have finish, the CPU2 did not boot from HD even it is not present as an option on Bios. I did not did and upgrade. it was a complete re-instalations since de hd just crash so it was repleace it.
Any hint or help will be apreciated.
Regards.
AFlores
CS2 bios - hd boot not work
Re: CS2 bios - hd boot not work
_________________________________________________
Nobody is so wise that needs no help, no one is so ignorant as not to deserve it.
Nobody is so wise that needs no help, no one is so ignorant as not to deserve it.
Re: CS2 bios - hd boot not work
Hello Frank.
This system is R9.0-h1.301-50-a.
The re-installation procedure goes fine without any trouble.
The problem is that the Bios did not recognize the hd so, its only boot from ethernet. I can´t configure the Bios to boot fron hd so it keep booting and booting by ethernet.
Regards.
AFLORES
This system is R9.0-h1.301-50-a.
The re-installation procedure goes fine without any trouble.
The problem is that the Bios did not recognize the hd so, its only boot from ethernet. I can´t configure the Bios to boot fron hd so it keep booting and booting by ethernet.
Regards.
AFLORES
_________________________________________________
Nobody is so wise that needs no help, no one is so ignorant as not to deserve it.
Nobody is so wise that needs no help, no one is so ignorant as not to deserve it.
Re: CS2 bios - hd boot not work
I had the same problem with one CS-2 board.
As I wrote in another post - only one solution I can think of - just take HD from another working CS2 board and install it on faulty one.
As I wrote in another post - only one solution I can think of - just take HD from another working CS2 board and install it on faulty one.
If it looks like a duck, swims like a duck, and quacks like a duck, then it probably is a duck.
Re: CS2 bios - hd boot not work
Hi all,
I still think the problem is with the CS2 board settings. In my case i have loaded the Hard disk using the CS2 that is not booting from hard disk, and when i transfer it to a working CS2 it works fine. Does anyone know how to go about the EFI SHELL? I believe the CS2 is not faulty but just requires some settings. Why has Alcatel been silent on this?
I still think the problem is with the CS2 board settings. In my case i have loaded the Hard disk using the CS2 that is not booting from hard disk, and when i transfer it to a working CS2 it works fine. Does anyone know how to go about the EFI SHELL? I believe the CS2 is not faulty but just requires some settings. Why has Alcatel been silent on this?
- frank
- Alcatel Unleashed Certified Guru
- Posts: 3169
- Joined: 06 Jul 2004 00:18
- Location: New York
- Contact:
Re: CS2 bios - hd boot not work
I dont have one on hand, but I think during boot time from the console you have 2 options to get into the bios.
One it CTRL-V + CTRL R (I think) ?
The other one I dont remember. Can you copy the console boot log ?
One it CTRL-V + CTRL R (I think) ?
The other one I dont remember. Can you copy the console boot log ?
Code Free Or Die
Re: CS2 bios - hd boot not work
During the boot there are two Options
Ctrl+B and
Ctrl+I
Some body told me that it is a bios compatability so the Bios shoud be updated. Does any one now how to update the CS2 Bios?
Ctrl+B and
Ctrl+I
Some body told me that it is a bios compatability so the Bios shoud be updated. Does any one now how to update the CS2 Bios?
_________________________________________________
Nobody is so wise that needs no help, no one is so ignorant as not to deserve it.
Nobody is so wise that needs no help, no one is so ignorant as not to deserve it.
Re: CS2 bios - hd boot not work
Dear frinds, hope everybody and your families are fine.
I still have issue pendeing so I´m returning to it.
Does anybody can tell me any hard disk compatible. I have search the same model and brand of the damge hd but it is to old and have not found. I buy another two hd (diferents in brand and size) than I use before but still no success.
Any hint will be apreciated.
Best Regards to all You.
AFlores
I still have issue pendeing so I´m returning to it.
Does anybody can tell me any hard disk compatible. I have search the same model and brand of the damge hd but it is to old and have not found. I buy another two hd (diferents in brand and size) than I use before but still no success.
Any hint will be apreciated.
Best Regards to all You.
AFlores
_________________________________________________
Nobody is so wise that needs no help, no one is so ignorant as not to deserve it.
Nobody is so wise that needs no help, no one is so ignorant as not to deserve it.
Re: CS2 bios - hd boot not work
Hello Frank
Thanks.
Thanks.
_________________________________________________
Nobody is so wise that needs no help, no one is so ignorant as not to deserve it.
Nobody is so wise that needs no help, no one is so ignorant as not to deserve it.