Hi people!
I have an OmniSwitch 6350.
When I checked the FAN status FAN1 show as "Not Running"
#########################################
show fan
#########################################
Chassis Fan Status
-------+---+-----------
1 1 Not Running
1 2 Running
1 3 Running
1 4 Running
This message can be considered as a FAN Faliure or is a normal condition for FAN?
Thanks in advance!
Fan Not Running
Re: Fan Not Running
it is normal behavior. if the temperatur is higher than other fans will run too.
Fan failure you will see in the swlog.
regards
Silvio
Fan failure you will see in the swlog.
regards
Silvio
-
- Member
- Posts: 8
- Joined: 16 Jul 2019 13:05
Re: Fan Not Running
I have 6450-p24
#########################################
show fan
#########################################
Chassis Fan Status
-------+---+-----------
1 1 Running
1 2 Running
1 3 Running
Q: In console all three fan showing running while physically I checked single fan is running,
Can I conclude that something is wrong with switch.
#########################################
show fan
#########################################
Chassis Fan Status
-------+---+-----------
1 1 Running
1 2 Running
1 3 Running
Q: In console all three fan showing running while physically I checked single fan is running,
Can I conclude that something is wrong with switch.
Re: Fan Not Running
no. Sometimes (depending from hardware and software) the fans are running slower - sometimes a part of the fans are down. If there is no error message and the temperature is normal than all is okay.
regards
Silvio
regards
Silvio