Configuring Option 82 on the 6400 (2019)

Post Reply
mperezATX
Member
Posts: 25
Joined: 29 Jan 2018 11:09

Configuring Option 82 on the 6400 (2019)

Post by mperezATX » 10 Sep 2019 12:27

Hello,

I had tried to use the information on the thread from https://www.alcatelunleashed.com/viewtopic.php?t=18216 but it appears to be old and out dated as the link from one6f no longer works. I am completely new to this and have 0 idea on how to configure it. Any help would be greatly appreciated! Below is an overview of my lab setup:
Option60 Config.png
I need to insert option 82 into the red network. How would I do this on my switch? From there, I think I should be able to configure the rest on my DHCP server (ISC DHCP on a Linux server) but if anyone is willing to help with that, you get bonus points! :)

Thanks again!
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “OmniSwitch 6400”