SIP licenses output

Post Reply
melozurdo

SIP licenses output

Post by melozurdo »

Hi guys,

Can anybody of you explain me what´s the meaning of the following output for "spadmin" command? Need to know if we have SIP licenses already installed or not. Need to know this: Ensure that the system has enough licenses available against the SIP Gateway, Advanced IP users, SIP users, Standard IP users with respect to the configuration requirement. This is for a possible integration with our Cisco servers.

Advanced IP Users : 1/15
Standard IP Users : 13/0
Total IP Users : 14/15
SIP Users : 0/0
4645 Engine : 0
4645 Voice Mail Boxes : 0/0
OmniPCX Enterprise : 1
4645 Network : 0
4645 Additional Lang. : 0/0
Integrated Gatekeeper : 0
SIP Gateway : 0

Thanks very much in advance.
Regards,
Nacho
mgsox

Re: SIP licenses output

Post by mgsox »

as far as I can tell you have no license for SIP users or SIP External GW.
you can connect oxe and cisco using IP trunk also (license needed if you do not have).
Post Reply

Return to “Beginner's questions about the (4400 / Enterprise) PHONE APPLICATION or OPERATING SYSTEM”