Connect to system OXE.

Post Reply
MinhLe
Member
Posts: 2
Joined: 06 Jun 2019 10:24

Connect to system OXE.

Post by MinhLe » 06 Jun 2019 10:45

Hi everybody, i am sorry because my english not good.

I Have a system OXE(bandnew) run first times i connect to board GD3 by 1 converter USB to RS232 from laptop to ConfigPort. But the system dont show login, so run booting (loop) ...booting.
How to connect to system OXE to configuration first times run. my system have 1 CS3, 1 GD3 , 1 GA3

Image

vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3566
Joined: 23 Sep 2004 06:47
Location: Russia

Re: Connect to system OXE.

Post by vad » 07 Jun 2019 00:03

For OXE configuration - you need to connect to CS3 (CPU) board.

MinhLe
Member
Posts: 2
Joined: 06 Jun 2019 10:24

Re: Connect to system OXE.

Post by MinhLe » 07 Jun 2019 21:42

vad wrote:
07 Jun 2019 00:03
For OXE configuration - you need to connect to CS3 (CPU) board.
Hi Bro.
When i connect to CS3 board, This system not respond. dont show anything.
I am using RS232 to Configport on CS board, baudrate 9600

vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3566
Joined: 23 Sep 2004 06:47
Location: Russia

Re: Connect to system OXE.

Post by vad » 09 Jun 2019 23:59

CS3 board powered? Exist some LED activities?

User avatar
Konstantinos.E
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 583
Joined: 12 Jan 2010 04:15
Location: Honolulu

Re: Connect to system OXE.

Post by Konstantinos.E » 14 Jun 2019 03:45

hello

gd must be powered up to power supply the cs. Also you need to check cabling between cs and gd .If wou don't know how to connect them connect lan ports to a switch or lanx card. If ops is loaded from alcatel there is a chance pbx to start up if there is no delivery installed you need pc installer and installation from scratch . All this are in the manual . If you don't have help I suggest to contact an alcatel partner .
Alca_holic

Post Reply

Return to “OXE (Crystal / Common) - System Documentation”