Alcatel Unleashed

Hello Guys,

Does anyone knows if in OXE, we can drop calls after 3 minutes of conversation? What i mean if after establishing a call, wait for 3 minutes and drop the call, so the user needs to call again.

Thanks in advanced.

Regards
Enrique

For outgoing calls there is a timer. Search the forum.
For incoming, no

For outgoing call (usually):
- TG - special services - Timed call release
- Phone feature COS - Temporized Call Release
- Timer 260

If attendant transfer outgoing call on abc network extension... call not disconnected....after set timer in 260.....if attendant transfer outgoing call on same node ..call disconnect after timer we set in timer 260...for 5mnts.....any solution please...

Hi,
For the attendant, you have also to manage the system parameter "Attendant Timed Call Release COS", parameter available since R11.2.2
Check system doc.
Best Regards

cavagnaro wrote: ↑13 Feb 2019 12:16 For outgoing calls there is a timer. Search the forum.
For incoming, no

as of release 11.2 time call release also apply for incoming call.
Timer no. 260 is used for public trunk and ABC-F call release
Timer no. 312 is used for QSIG call release

Hi,
Also, you can use the system parameter "Call Release Timer Restart" to overcome the old limit of ~54min
BRegards

sadim wrote: ↑16 Dec 2019 12:17 Hi,
For the attendant, you have also to manage the system parameter "Attendant Timed Call Release COS", parameter available since R11.2.2
Check system doc.
Best Regards

Hi.
Our release is R11.0.1..and there is no ..system parameter ..attendant timed call releaae cos...any solution please..

fery_s wrote: ↑17 Dec 2019 01:30

cavagnaro wrote: ↑13 Feb 2019 12:16 For outgoing calls there is a timer. Search the forum.
For incoming, no

as of release 11.2 time call release also apply for incoming call.
Timer no. 260 is used for public trunk and ABC-F call release
Timer no. 312 is used for QSIG call release

Dear..
Timer 260-2990......we set for timed release call...if any extension access trunk group directly ...call release work...from abcf...
but if attendant transfer outgoing call on abcf node extension call not released after set timer 260-2990.....
Our system release 11.0.1. Any idea brother...
Advance thanks..

Hi,
I can only see two possibilities, or you upgrade OXE to R11.2 or upper, or you convert the attendant to a normal set (with several multi-line keys). but losing the specific attendant features.