Switches are not able to discover in OMNIVISTA 2500 NMS

Post Reply
Abdallah
Member
Posts: 2
Joined: 03 Dec 2018 04:30

Switches are not able to discover in OMNIVISTA 2500 NMS

Post by Abdallah » 03 Dec 2018 04:42

Switche OS6350 not showing in OMNIVISTA 2500 NMS even though I have configure SNMP in my access switch like this:-

! SNMP :
snmp security no security
snmp community map "default" user "test" on
snmp station 10.253.0.101 162 "test" v2 enable

Can some one help me???

ymilner
Member
Posts: 4
Joined: 23 Dec 2012 04:26

Re: Switches are not able to discover in OMNIVISTA 2500 NMS

Post by ymilner » 03 Dec 2018 09:05

Have you created user named test?
Do "show user" and see if user named test has snmp enabled.

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1223
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Switches are not able to discover in OMNIVISTA 2500 NMS

Post by silvio » 03 Dec 2018 15:22

Hi,
also you need for v2 the following:

Code: Select all

user test password not-important read-only all no auth
aaa authentication snmp local
And have you created within OV the community default and associated this snmp-setup to your ip-ranges (or direct to device)?

regards
Silvio

Abdallah
Member
Posts: 2
Joined: 03 Dec 2018 04:30

Re: Switches are not able to discover in OMNIVISTA 2500 NMS

Post by Abdallah » 06 Dec 2018 07:58

Hi All,
Yes i created user named test and created within OV the community default and associated this snmp-setup to my IP-ranges!!!!
what can i do???!!!!

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1223
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Switches are not able to discover in OMNIVISTA 2500 NMS

Post by silvio » 06 Dec 2018 16:14

Please post "show user".
And try to use an other community than "default". Maybe this isn't a good idea.
Also I prefer to use snmpv3 - it is more easier to configure. In my cases it works always without any issues.
regards
Silvio

Post Reply

Return to “OmniVista 2500 v4.x”