Alcatel Unleashed

Hi,

I would like to create a deployment script with the following commands on every switch in the network:

vlan 11 enable name "Voice"
vlan 11 mobile-tag enable

vlan port mobile 1/8
lldp network-policy 1 application voice vlan 11 l2-priority 5 dscp 46
lldp network-policy 2 application voice-signaling vlan 11 l2-priority 0 dscp 26
lldp chassis tlv med  capability enable network-policy enable
lldp 1/8 med network-policy 1 2


Wil this work?

<js>
cli.sendCmd("vlan port mobile 1/8") 
cli.sendCmd("lldp network-policy 1 application voice vlan 11 l2-priority 5 dscp 46")
cli.sendCmd("lldp network-policy 2 application voice-signaling vlan 11 l2-priority 0 dscp 26")
cli.sendCmd("lldp chassis tlv med  capability enable network-policy enable")
cli.sendCmd("lldp 1/8 med network-policy 1 2")

cli.sendCmd("vlan 11 enable name "OCMW-Voice"")
cli.sendCmd("vlan 11 mobile-tag enable")
</js> 


Many thanks.

As far as i know you don't have to use the js style, as you are only pushing static commands.
on your JS part: Unsure whether you can set a lldp network-policy with a vlan that is setup later
(vlan11 is sent later)

Try pasting this on a shell of a switch and look for errors, if that works you can put it into a cli script and push it to multiple switches.

Use your brain!
If you have already configured port 1/8 (e.g. with vlans/tagged ports) you may run into errors.

If you push that to your cores which have downlinks on 1/8 you may run into trouble.
If you already have a network policy you may run into trouble (test what happens)
If you push that to devices that don't support some of the features.. you mayrun into trouble.