Alert in log

Post Reply
MaxDevil
Member
Posts: 1
Joined: 02 Aug 2018 18:05

Alert in log

Post by MaxDevil » 02 Aug 2018 18:17

Hello,

I have two 6350 configured in stack and in log I have this alerts :

Code: Select all

HU AUG 02 23:18:16 2018    CSM-CHASSIS   alert == CSM == cs_csm_rx_hello:1307 - Checksum received from slot 66

THU AUG 02 23:18:16 2018    CSM-CHASSIS   alert == CSM == csCsmHawkRuningChecksumAckSend:3098 - checksum ack sent successfully
THU AUG 02 23:18:16 2018    CSM-CHASSIS   alert [Count.]to slot 66

THU AUG 02 23:28:36 2018    CSM-CHASSIS   alert == CSM == cs_csm_rx_hello:1307 - Checksum received from slot 66

THU AUG 02 23:28:36 2018    CSM-CHASSIS   alert == CSM == csCsmHawkRuningChecksumAckSend:3098 - checksum ack sent successfully
THU AUG 02 23:28:36 2018    CSM-CHASSIS   alert [Count.]to slot 66

THU AUG 02 23:38:56 2018    CSM-CHASSIS   alert == CSM == cs_csm_rx_hello:1307 - Checksum received from slot 66

THU AUG 02 23:38:56 2018    CSM-CHASSIS   alert == CSM == csCsmHawkRuningChecksumAckSend:3098 - checksum ack sent successfully
THU AUG 02 23:38:56 2018    CSM-CHASSIS   alert [Count.]to slot 66
Could you please tell me It's normal or not ?

Thanks

MaxDevil

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1136
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Alert in log

Post by silvio » 03 Aug 2018 07:19

probably no issue - checksum successfully every 10 minutes.
But if you are unsure you have to open a ticket at ALE.
regards
Silvio

Post Reply

Return to “OmniSwitch 6350”