ez32 - problem with combo detection error

Post Reply
timbrown
Member
Posts: 4
Joined: 26 Jan 2015 19:35

ez32 - problem with combo detection error

Post by timbrown » 29 May 2018 01:52

Hi,

I have a slight issue with an ez32 card on one of our customers sites. Well apparently there's this error that says "Problem in the combo detection 0 0 0 0 : detected" and the board keeps rebooting. The CPU & BSY LEDs do not light up as well.

Any idea or comments as to why this is??


Thanks
Tim

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7007
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: ez32 - problem with combo detection error

Post by cavagnaro » 30 May 2018 08:57

Defective board, check its internal components.
Replace it

Enviado de meu E6633 usando o Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

Post Reply

Return to “Boards”