Page 1 of 1

Upgrade to 5.6.5

Posted: 03 Feb 2018 12:49
by link
Hello,
I'm trying to upgrade voicemail software A4635H (VPM35 board) from 5.4.9 to 5.6.5. For this I have connected to LAN switch and v24 console.
In startup process vpm board I tried to hit <DEL> to enter Bios setup but unsuccessfully, the system does not respond to input DEL key and continue to boot.
Is any other ways to upgrade A4635H system?
Thanks.

Re: Upgrade to 5.6.5

Posted: 04 Feb 2018 03:59
by mgoegel
Maybe your terminal settings do not fit to the console.
Have you tried with backspace or CTRL H

Regards Mario


Gesendet von iPad mit Tapatalk

Re: Upgrade to 5.6.5

Posted: 04 Feb 2018 12:12
by link
Ok, I'll try and give response.
Thanks.

Re: Upgrade to 5.6.5

Posted: 05 Feb 2018 05:51
by alexeik
i had the same Problem, and finally used the good old hyperterminal...

Re: Upgrade to 5.6.5

Posted: 05 Feb 2018 16:42
by link
I have installed SecureCRT and upgraded voicemail to 5.6.5 version successfully.