STACKING SETUP

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1136
Joined: 01 Jul 2008 10:51
Location: Germany

Re: STACKING SETUP

Post by silvio » 20 Jul 2018 09:39

In your case there is no automatic. If you realy would like to change the numbers in this way than make a backup of your boot.cfg. You have to change all port number by yourself from 2/1 to 1/1 etc. (f.e. with notepad++) within this file. Than delete all the boot.cfg (working and certified) and boot.slot.cfg (flash) within all switches and copy the new edited boot.cfg file to working and certified in old stack 2. Now power down all the switches and power up in order old #2 up to old #5 (with delay more than 15 sec - better wait half a minute between power up).
I hope it will work. :)
regards
Silvio

thermseeker
Member
Posts: 7
Joined: 08 Jul 2016 08:40

Re: STACKING SETUP

Post by thermseeker » 23 Jul 2018 12:40

Thank you Silvio, will do that way.
Regards,
Tales

Post Reply

Return to “OmniSwitch 6450”