mao error 2686 on Main CPU
Posted: 23 Aug 2017 22:46
I had uploaded the new msk file in the main oxe but the same was not updating in standby also i getting the incidents as in picture
Shutdown the stand by CPU (swinst, menu 1, 7, YES)
When it restart, login, and use the command "mastercopy -s NAME_OF_YOUR_MAIN_CPU"
Once the system restarted, go back in swinst and enabled the start auto start (swinst, 2, 6, 2, YES)
Try again your modification once the "twin" command says that everything is OK / READY