Page 1 of 1

OTMC-V

Posted: 22 Jun 2017 10:04
by munzik
Hi all,

does anybody have experience with install OTMC to virtual server ?? ?
we tried it with last bootdvd-12.1.009.000-x86_64 and bootdvd-12.1.010.000-x86_64 ...

• Virtualmachinename:OTMC-V
• Operatingsystem: SUSE Linux Enterprise Server 12 (64 bits)
• Hyper-threadingmustbedeactivated: set theoptionHyperthreadedCoreSharing to None
• VMwareESXimustbe 6.0 , theVirtualMachineVersion 11( tried 10 too)
• CPU: 2 VCPUs
• RAM: 8 GB
• Network adapter: VMXNET 3
• SCSI controller: LSI Logic SAS
• Create a newvirtual disk – 105 GB (ThickProvision Lazy Zeroed) – SCSI (0:0)

then • SelectOpenTouchMessaging Center forVirtualizedInfrastructure (15000 users).

install was started, but in a part ´create partition plan ´ instalallation stopped by fault message:
device "" not found by storage backend

http://www.imgup.cz/image/Lh4n

if any idea, please reply
thanks

Re: OTMC-V

Posted: 25 Jun 2017 13:35
by cavagnaro
Try to change the drive type. Scsi, ide

Enviado de meu E6633 usando Tapatalk


Re: OTMC-V

Posted: 25 Jun 2017 15:51
by munzik
Thanks Cavargnaro... I will try it and write result here

Re: OTMC-V

Posted: 29 Jun 2017 04:42
by jigareda
Hi munzik,

We had the same problem, it was about disk space. I had to put double size disk space, because I selected smooth updates in previous installation steps. I recomend you that use OTCP tool in order to size your system, then you should create your virtual machine with double space disk that OTCP said before.

Regards,

Re: OTMC-V

Posted: 29 Jun 2017 07:17
by munzik
Cavargnago : We tried to change SCSI controller, but the instalation was stoppet at the same time and message fault

Jigareda : Thanks ! It could be good idea.. we will try it with 250Gb size and let you know

Re: OTMC-V

Posted: 04 Aug 2017 09:13
by munzik
installation with 250Gb HDD without problem , thanks :-)

Re: OTMC-V

Posted: 04 Aug 2017 15:27
by cavagnaro
Thanks for sharing

Enviado de meu E6633 usando Tapatalk