Alcatel Unleashed

Hello dear people, I am newbie with Alcatel technology and I am trying to establish an sdp between a 7705 SAR-M and a Huawei NE40 and so far I couldn´t.Also Tried to establish it between 7210 SAS-M and a Huawei and also was unsuccessfull.
Just for testing purposes I already established it successfully between a 7705 SAR-M and a 7210 SAS-M.
Is there any interoperability restriction or bug?
The SW versions are this
7705 SAR-M TiMOS-B-7.0.R6
7210 SAS-M TiMOS-B-8.0.R6

Please help me, I am really desperate with this issue.
The successfull config between the ALUs is below.
Thanks in advance for your feedback.

*A:ALU# show router route-table 181.209.0.182

===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
181.209.0.182/32 Remote ISIS(1) 02d23h00m 18
192.168.222.5 2000
-------------------------------------------------------------------------------
No. of Routes: 1
Flags: n = Number of times nexthop is repeated
B = BGP backup route available
L = LFA nexthop available
===============================================================================
*A:ALU# show router route-table 181.209.0.175

===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
181.209.0.175/32 Remote ISIS(1) 02d23h05m 18
192.168.222.5 1000
-------------------------------------------------------------------------------
No. of Routes: 1
Flags: n = Number of times nexthop is repeated
B = BGP backup route available
L = LFA nexthop available
===============================================================================
*A:ALU#
*A:ALU>config>service# info
----------------------------------------------
sdp 2225 create
far-end 181.209.0.175
ldp
keep-alive
shutdown
exit
no shutdown
exit
sdp 2226 create
far-end 181.209.0.182
ldp
keep-alive
shutdown
exit
no shutdown
----------------------------------------------
*A:ALU>config>service#

*A:ALU# show service sdp

============================================================================
Services: Service Destination Points
============================================================================
SdpId AdmMTU OprMTU Far End Adm Opr Del LSP Sig
----------------------------------------------------------------------------
2225 0 9174 181.209.0.175 Up Down MPLS L TLDP
2226 0 9174 181.209.0.182 Up Up MPLS L TLDP
----------------------------------------------------------------------------
Number of SDPs : 6
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
============================================================================
*A:ALU#

Have you resolve your problem? I try to establish a sdp between a sr7750 and a huawei ne40e.And it can not work.

Hi.
Please give us output of "show service sdp <id> detail", and other details you may have/provide.

Also might want to do a packet capture between the known, working pairs and the huawei one and see whats different.