Page 1 of 1
Caller ID - incoming calls
Posted: 09 Aug 2016 09:41
by kfz
Hi,
is it possible to define few cell phone numbers in some kind of phonebook, so that when cell phone number is calling, there is ID displayed on our Alcatel-Lucents ?
OmniVista 4760, OXE j2.501.
Re: Caller ID - incoming calls
Posted: 09 Aug 2016 09:44
by joao.carlos
Yes you can create abbreviated numbers with the numbers desired than they will appear on the ip/digital sets' screens.
Re: Caller ID - incoming calls
Posted: 09 Aug 2016 12:21
by kfz
Could you please tell me where it can be done? There is "Phone book" in OXE, but maximum number's lenght is 8 digits only.
Re: Caller ID - incoming calls
Posted: 09 Aug 2016 12:26
by joao.carlos
mgr >> Abbreviated Numbers
Re: Caller ID - incoming calls
Posted: 09 Aug 2016 12:29
by kfz
What is "mgr"? Manager?
Re: Caller ID - incoming calls
Posted: 09 Aug 2016 12:37
by cavagnaro
Ohhhh boy... Command you do on telnet. If you don't even know that please stay away
Enviado de meu E6633 usando Tapatalk
Re: Caller ID - incoming calls
Posted: 09 Aug 2016 12:42
by joao.carlos
Sorry kfz, but mgr is the basic of the basic command to configure OXE.
If you don't know it, i suggest you to contact your maintainer since anything you change on your PBX without knowing what you're doing may damage your configuration.
But, if you'd rather try, using OmniVista you should go to Configuration module, Configure the PBX, and look for Speed Dialing menu.
Re: Caller ID - incoming calls
Posted: 09 Aug 2016 15:03
by kfz
Found it! OXE -> Abbreviated numbering.
Thank you.
Re: Caller ID - incoming calls
Posted: 09 Aug 2016 17:54
by joao.carlos
Good luck!
Enviado do meu iPhone usando Tapatalk