Alcatel Unleashed

I need help with Cisco to Alcatel routed port command on Alcatel OS6450. Thanks in advanced.
Interface FastEthernet0/24
no switchport
ip address 192.168.1.2 255.255.255.0

switch# show microcode
Package Release Size Description
-----------------+---------------+--------+-----------------------------------
KFbase.img 6.6.5.63.R02 16775643 Alcatel-Lucent Base Software
KFos.img 6.6.5.63.R02 2586839 Alcatel-Lucent OS
KFeni.img 6.6.5.63.R02 5792760 Alcatel-Lucent NI software
KFsecu.img 6.6.5.63.R02 610993 Alcatel-Lucent Security Management
KFdiag.img 6.6.4.288.R01 2329809 Alcatel-Lucent Diagnostic Software

By the way, rtr-port option is not avalable
ip interface RTR1 address 192.168.1.2/24 rtr-port 1/24 rtr-vlan 3
ip interface RTR1 address 192.168.1.2/24 ?
^
<cr> ADDRESS ADMIN ETH2
FORWARD IFINDEX
LOCAL-HOST-DBCAST
LOCAL-PROXY-ARP MASK MTU NO
PRIMARY SNAP TUNNEL VLAN