Alcatel Unleashed

Hi,

I know the telnet command to see the status of the boards of a shelf (eg "config 2 -v -d") but I'd like to know the command to see if a remote shelf is still active and the link between the pbx and remote shelf is up. Can you get a list of all links to remote shelves and see the status of the links?

Anyone here who can help me with this please?

Thanks a lot!

shelf? Shelf doesn't work alone...needs a board. So doing config 2 will show all boards on it.
If all are REG NOT INIT then shelf is out
You will also have an alarm about it

Thank you

And suppose it is a media gateway or voice hub, how do i see the status of the link and if all is ok?

the board in controller slot must be in service.
mg controller slot == 0
vh controller slot == 1

regards....

Thanks!