Hi everybody,
I am trying to install OT 8440 VM in IBM3250 sever(having 2 LAN ports). RED HAT Linux 5 has been successfully installed & i provided all the ip @ to the server. After that i am running checkSystemLinux.sh file from the DVD-ROM, at the end i am receiving the following error.
Some problem found on this system:
More than one IP address
Current status of the system is NOT READY.
Pls help me to solve this.
More than one IP address ERROR while running checkSystemLinux.sh file of OT8440
-
- Member
- Posts: 9
- Joined: 20 Apr 2015 07:25
More than one IP address ERROR while running checkSystemLinux.sh file of OT8440
You do not have the required permissions to view the files attached to this post.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: More than one IP address ERROR while running checkSystemLinux.sh file of OT8440
Fix? YEs, you can only have 1 IP Address, both will have same IP via a BOND interface. So if eth0 goes down then eth1 will come up with same IP. Obvisouly both need to be connected to different switches.
This is for redundancy.
If you just don't care, fix and leave ETH0 plugged in.
This is for redundancy.
If you just don't care, fix and leave ETH0 plugged in.
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: More than one IP address ERROR while running checkSystemLinux.sh file of OT8440
All is on documentation and on training...
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 9
- Joined: 20 Apr 2015 07:25
Re: More than one IP address ERROR while running checkSystemLinux.sh file of OT8440
Yes i am allowing it for BONDING.
But i cant understand the reason, Failure of MORE THAN ONE IP ADDRESS.
Because of this i cant complete the Software installation
But i cant understand the reason, Failure of MORE THAN ONE IP ADDRESS.
Because of this i cant complete the Software installation
Re: More than one IP address ERROR while running checkSystemLinux.sh file of OT8440
please post output from ifconfig command and attach the file dmesg. txt (create it with dmesg > dmesg. txt).
regards...
regards...
--- back to basics... focus your eyes to the essential things... ---
-
- Member
- Posts: 9
- Joined: 20 Apr 2015 07:25
Re: More than one IP address ERROR while running checkSystemLinux.sh file of OT8440
thanks for all ur support...
Problem with the usb0 Ethernet interface in the server(DHCP enabled),
but ip address is showing in the command ifconfig | grep inet
so disabled the usb0 Ethernet interface & run the .sh file.
Now i am not getting the MORE THAN ONE IP ADDRESS Error & application also installed.
Problem with the usb0 Ethernet interface in the server(DHCP enabled),
but ip address is showing in the command ifconfig | grep inet
so disabled the usb0 Ethernet interface & run the .sh file.
Now i am not getting the MORE THAN ONE IP ADDRESS Error & application also installed.