Alcatel Unleashed

Dec 18 06:27:57 Switch-Core local0.info swlogd: flashManager FlashMgr Main info(5) flashMgrValidateImage_exec: calling system(/bin/validate_image /flash/working/Ros.img))- duplicated 1 times!
Dec 18 06:27:58 Switch-Core local0.info swlogd: flashManager FlashMgr Main info(5) flashMgrValidateImage_exec: valid- duplicated 5 times!
Dec 18 06:27:58 Switch-Core local0.info swlogd: flashManager FlashMgr Main info(5) flashMgrValidateImage_exec: calling system(/bin/validate_image /flash/working/Reni.img))- duplicated 1 times!
Dec 18 06:28:00 Switch-Core local0.info swlogd: flashManager FlashMgr Main info(5) flashMgrValidateImage_exec: calling system(/bin/validate_image --compareImage1=/flash/working/Ros.img --co- duplicated 1 times!
Dec 18 06:28:00 Switch-Core local0.info swlogd: flashManager FlashMgr Main info(5) flashMgrValidateImage_exec: calling system(/bin/validate_image --compareImage1=/flash/working/Reni.img --c- duplicated 1 times!
Dec 18 06:28:00 Switch-Core local0.info swlogd: ChassisSupervisor bootMgr info(5) Copy running to certified: Synchronizing secondary CMM- duplicated 1 times!
Dec 18 06:28:01 Switch-Core local0.info swlogd: ChassisSupervisor MipMgr info(5) Copy running to certified succeeded; Secondary synchronization succeeded- duplicated 1 times!
Dec 18 06:28:01 Switch-Core local0.emerg swlogd: SES CMD alarm(1) CLI log, user: admin (10.10.80.171), cmd: copy running certified flash-synchro, result: SUCCESS
Dec 18 06:28:02 Switch-Core local0.info swlogd: linkAggCmm main info(5) mip_msg_queuing NO 1 - duplicated 9 times!
Dec 18 06:33:04 Switch-Core local0.info swlogd: linkAggCmm main info(5) mip_msg_queuing NO 1 - duplicated 5 times!

no idea what any of it means. any thoughts?

who can help me?

Thx

So far i do not see anything special.. just some logs for a copy running certified flash-synchro
It's just info logs.

Not sure what the last two lines are for, but if everything is fine you do not need to worry.

What errors do you encounter?

i do "copy running certified flash-synchro"

but swlog Always show calling system......

How can I do?

It's fine..
it just states that the switch is executing the shell (system) command to compare the images in working and certified.