Page 1 of 1

8770 ticket retrieve

Posted: 18 Dec 2014 07:55
by mgsox
hi all i have installed 8770 r2, when i sycrinize it with oxe i only get the last 3 days of ticket. oxe has 60 days but i cannot retieve them. doese any one know where can i increase the days of ticket retrieval?

thanks for your help

Re: 8770 ticket retrieve

Posted: 18 Dec 2014 21:08
by Zero
Hi mgsox,

In your case, please follow the steps below:
1. Login to your OmniVista8770
2. Go to the registered node under Network\Configuration\nmc\Network\Subnetwork\[node]
3. Remove the indicated ‘Last polled accounting file’ in Data Collection tab
4. Then, apply changes by clicking the green-check button
5. After, remove the ACCOUNT.LIS under \\8770\data\loader\networknumber=0\subnetworknodenumber=1\
6. Afterwards, execute ‘DirManag.exe’ under \\8770\bin\
7. Click ‘Connect’ and login as “cn=directory manager” (password= password set during the installation; e.g. AdminNmc)
8. After, click OK button
9. Locate “daysfirstsynchro” parameter by expanding o=nmc\OmniVista 8770\Servers\SyncLdapPbx\
10. Modify default value of “daysfirstsynchro=2” to “daysfirstsynchro=360”
11. After, go to File\Save and wait for the ‘Successful’ notification message then click OK button
12. Then, go back to OmniVista 8770 and perform a manual synchronization


Note: For your future installations, set first the “daysfirstsynchro” to 360 prior on performing the initial synchronization.



Regards,
Zero

Re: 8770 ticket retrieve

Posted: 11 Dec 2017 08:54
by dualcom
Zero wrote: 18 Dec 2014 21:08 Hi mgsox,

In your case, please follow the steps below:
1. Login to your OmniVista8770
2. Go to the registered node under Network\Configuration\nmc\Network\Subnetwork\[node]
3. Remove the indicated ‘Last polled accounting file’ in Data Collection tab
4. Then, apply changes by clicking the green-check button
5. After, remove the ACCOUNT.LIS under \\8770\data\loader\networknumber=0\subnetworknodenumber=1\
6. Afterwards, execute ‘DirManag.exe’ under \\8770\bin\
7. Click ‘Connect’ and login as “cn=directory manager” (password= password set during the installation; e.g. AdminNmc)
8. After, click OK button
9. Locate “daysfirstsynchro” parameter by expanding o=nmc\OmniVista 8770\Servers\SyncLdapPbx\
10. Modify default value of “daysfirstsynchro=2” to “daysfirstsynchro=360”
11. After, go to File\Save and wait for the ‘Successful’ notification message then click OK button
12. Then, go back to OmniVista 8770 and perform a manual synchronization


Note: For your future installations, set first the “daysfirstsynchro” to 360 prior on performing the initial synchronization.



Regards,
Zero
Thanks Zero, very good information

Re: 8770 ticket retrieve

Posted: 12 Dec 2017 06:51
by doublezero
Thank you for that info

Gesendet von meinem A0001 mit Tapatalk


Re: 8770 ticket retrieve

Posted: 23 Jan 2018 02:42
by morio
Zero wrote: 18 Dec 2014 21:08 Hi mgsox,

In your case, please follow the steps below:
1. Login to your OmniVista8770
2. Go to the registered node under Network\Configuration\nmc\Network\Subnetwork\[node]
3. Remove the indicated ‘Last polled accounting file’ in Data Collection tab
4. Then, apply changes by clicking the green-check button
5. After, remove the ACCOUNT.LIS under \\8770\data\loader\networknumber=0\subnetworknodenumber=1\
6. Afterwards, execute ‘DirManag.exe’ under \\8770\bin\
7. Click ‘Connect’ and login as “cn=directory manager” (password= password set during the installation; e.g. AdminNmc)
8. After, click OK button
9. Locate “daysfirstsynchro” parameter by expanding o=nmc\OmniVista 8770\Servers\SyncLdapPbx\
10. Modify default value of “daysfirstsynchro=2” to “daysfirstsynchro=360”
11. After, go to File\Save and wait for the ‘Successful’ notification message then click OK button
12. Then, go back to OmniVista 8770 and perform a manual synchronization


Note: For your future installations, set first the “daysfirstsynchro” to 360 prior on performing the initial synchronization.



Regards,
Zero

hi zero,
thanks for your very useful information. ever since i got this i am modifying all my clients. one other small thing,, is there any way to disable the ''purge'' on accounting tickets. because i dont want to lose any tickets which is been loaded in the 8770 server.
any useful info will be great...

thanks in advace
morio