INTIP3 board reboot continue

Post Reply
thkim81
Member
Posts: 311
Joined: 15 Jun 2009 22:57
Location: korea

INTIP3 board reboot continue

Post by thkim81 » 29 Oct 2014 05:07

Hi~~

Softmsm configure R11.0.1 in OXE.

INTIP3 softmsm configure and wating for normal status.

configure :

INTIP 3 :




+-Review/Modify: Ethernet Parameters----------------------------------------------------+
| |
| Node Number (reserved) : 6 |
| Shelf Address : 3 |
| Board Address : 6 |
| Shelf - Board Address : 3-6 |
| |
| Interface Type + INTIP3B |
| Board IP Address : 192.168.0.103 |
| IP NetMask : 255.255.255.0 |
| Default Gateway IP Address : 192.168.0.1 |
| IP Quality of service : 0 |
| Cryptographic box address : 192.168.0.103 |
| Board Ethernet Address : 00:80:9f:d2:8b:1a |
| Numb. of sig. channels inter-ACT : 0 |
| IP Domain Number : 0 |
| Gateway H323 name : -------------------------------- |
| |
+---------------------------------------------------------------------------------------+

softmsm :


+-Review/Modify: Addresses to protect---------------------------------------------------+
| |
| Node Number (reserved) : 6 |
| Instance (reserved) : 1 |
| IP address : 192.168.0.103 |
| |
| Type + Soft MSM |
| |
+---------------------------------------------------------------------------------------+



INTIP3 board configure :

Board role INT-IP B
MAC address 00809FD28B1A
1. IP address 192.168.0.103
2. Netmask 255.255.255.0
3. Gateway address 192.168.0.1
4. CS role address 192.168.0.105
5. CS redundancy role address 0.0.0.0
6. Crystal number 3 (Manual allocation)
7. IP QoS menu VLAN disabled
BACKUP menu
9. Duplex and speed mode menu auto
10. Download binaries timeout 1200[ms]
11. Passive CS address 0.0.0.0
12. Security and Encryption PROTECT, SoftMSM enabled, PSKg2
13. Telnet server close
14. Archive log files
15. Allow shell commands usage not allowed
0. Exit


but INTIP3 board rebooting continue.

I check the below reset cause log.


Reset: CS DL KO without configured PCS (0 - 0)



this log concern with intip3 board rebooting.

how can I fix INTIP3 board status ?
You do not have the required permissions to view the files attached to this post.

User avatar
Split
Member
Posts: 101
Joined: 26 Jun 2009 04:45
Location: Germany

Re: INTIP3 board reboot continue

Post by Split » 30 Oct 2014 18:16

Check BP Sites for new Patch and patchnotes i thought there are some issu with intip3 and softmsm
ACSE OmniPCX Enterprise Business R9/10/11
ACSE ICS 8400 R6
ACSE OpenTouch R1/R2

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4026
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: INTIP3 board reboot continue

Post by tot3nkopf » 31 Oct 2014 04:06

Is the secured patch installed on the PBX?

Post Reply

Return to “Encryption”