Runtime failure iom3-xp on ESS
Posted: 12 Aug 2014 00:04
Hello everyone, I'll try share this problem and hope get helped from you guys,
Oke. I found this problem yesterday, when my SAM generate some error at my iom3-xp card. The card reboot suddenly. There is information about the card
When I see last bootup reason from the card, I found the card reboot because runtime failure, I want to ask why runtime failure can be happened?
The I try to looking for alarm generate on Log ID 99. then I found this.
The alarm reported there is an Internal HW error? Is it runtime failure kind of HW error? Please help me to find out the answer about this problem.
Thanks so much
Oke. I found this problem yesterday, when my SAM generate some error at my iom3-xp card. The card reboot suddenly. There is information about the card
Code: Select all
===============================================================================
Card 1
===============================================================================
Slot Provisioned Type Admin Operational Comments
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 iom3-xp up up
IOM Card Specific Data
Capabilities : ESS
Clock source : none
Named Pool Mode : Disabled
Fail On Error : Disabled
Available MDA slots : 2
Installed MDAs : 1
FP 1 Specific Data
WRED Admin State : Out Of Service
WRED buffer-allocation max : 2500
WRED buffer-allocation min : 2500
WRED reserved-cbs max : 2500
WRED reserved-cbs min : 2500
WRED Slope Policy : default
hi-bw-mc-srcEgress Alarm : 2
hi-bw-mc-srcEgress Group : 0
mc-path-mgmt Admin State : Out Of Service
Ingress Bandwidth Policy : default
Stable Pool Sizing : False
Hardware Data
Platform type : 7450
Part number : 3HE03620AAAP01
CLEI code : IPU3ADAEAA
Serial number : NS1407F0683
Manufacture date : 02122014
Manufacturing deviations : (Not Specified)
Manufacturing assembly number : 82-0107-13
Administrative state : up
Operational state : up
Temperature : 52C
Temperature threshold : 75C
Software boot (rom) version : X-11.0.R4 on Tue Jul 23 12:27:33 PDT 2013
by builder
Software version : TiMOS-I-11.0.R6 iom/hops ALCATEL ESS 7450
Copyright (c) 2000-2013 Alcatel-Lucent.
All rights reserved. All use subject to
applicable license agreements.
Built on Tue Nov 19 15:14:12 PST 2013 by
builder in /rel11.0/b1/R6/panos/main
Time of last boot : 2014/08/08 15:12:07
Current alarm state : alarm cleared
Base MAC address : 00:d0:f6:f1:00:32
Last bootup reason : runtime failure
Memory capacity : 2,048 MB
When I see last bootup reason from the card, I found the card reboot because runtime failure, I want to ask why runtime failure can be happened?
The I try to looking for alarm generate on Log ID 99. then I found this.
Code: Select all
2893 2014/08/08 15:10:31.46 WIB MAJOR: CHASSIS #2003 Base Card 1
"Class IO Module : removed"
2892 2014/08/08 15:10:31.47 WIB MAJOR: CHASSIS #2016 Base Equipment
"Clear IO Module 1 failure"
2891 2014/08/08 15:10:30.27 WIB MAJOR: CHASSIS #2003 Base Mda 1/1
"Class MDA Module : removed"
2890 2014/08/08 15:10:30.26 WIB MAJOR: CHASSIS #2001 Base Card 1
"Class IO Module : failed, reason: Reported internal hw error"
Thanks so much