Page 1 of 1
OmniSwitch 6450 NAT
Posted: 13 May 2014 11:17
by rnavi89
Hi, need to know if ALU OS6450 can do NAT/PAT? If what are the commands to configure NAT/PAT
Re: OmniSwitch 6450 NAT
Posted: 13 May 2014 11:21
by cavagnaro
What does documentation says?
Re: OmniSwitch 6450 NAT
Posted: 13 May 2014 11:26
by rnavi89
Could not find it on the documentation
Re: OmniSwitch 6450 NAT
Posted: 13 May 2014 11:40
by jerry_yang80
hei, if os6450 can do NAT of PAT.The sow can climb the tree.
Re: OmniSwitch 6450 NAT
Posted: 30 Dec 2017 04:31
by bijendrasinghi
One to One NAT
-> policy condition cond1 source ip 192.168.10.10 # LAN IP
-> policy action action1 source rewrite ip 155.190.23.123 # Public IP
-> policy rule trans_rule1 condition cond1 action action1
The Public IP should have an interface on switch.
Many to one PAT
-> policy condition internal source ip 10.10.10.0 mask 255.0.0.0 # LAN IP address
-> policy action external source rewrite ip 183.87.92.21 # Public IP add
-> policy rule nat condition internal action external
AOS 6.7.1 and above..
also available in ALE AOS document.