Strange message from OxE Slave in 10.1.1
Posted: 23 Apr 2014 04:38
Hi !
In our new upgraded lab environment to 10.1.1we now see new errors, on Main it shows: 1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,0,0) and on Slave we see: (681632:000022) Unknown physical terminal , (681632:000023) Dump: .ff.03.0f.00.00.0f.00.00.08.00.6a.0a.00.01.00
We do a imm fwd to a network no via a prefix and type = "Station"., the forward is validated and it shows up onto the set. When we test the to routing it works as before
and a T3 shows correct Q931 handling and response.
If we shutdown the slave, we see no messages at all. We have not seen this behavior on 7,1, 8,x , 9,1 , etc ...
Any ideas or is it a new (Main,Slave) bug in the 10.1.1
Regards ...
/S
In our new upgraded lab environment to 10.1.1we now see new errors, on Main it shows: 1603=IO1 driver error, wrong telephone msg received, line 6329, position (0,0,0) and on Slave we see: (681632:000022) Unknown physical terminal , (681632:000023) Dump: .ff.03.0f.00.00.0f.00.00.08.00.6a.0a.00.01.00
We do a imm fwd to a network no via a prefix and type = "Station"., the forward is validated and it shows up onto the set. When we test the to routing it works as before
and a T3 shows correct Q931 handling and response.
If we shutdown the slave, we see no messages at all. We have not seen this behavior on 7,1, 8,x , 9,1 , etc ...
Any ideas or is it a new (Main,Slave) bug in the 10.1.1
Regards ...
/S