Page 1 of 1
how to configure 8082 w/o 8770
Posted: 22 Apr 2014 15:20
by ainy
Hi,
can anyone guide me on how to configure My IC 8082 in oxe.
in my system i don't have 8770 license. Also share a document than can be of help.
Re: how to configure 8082 w/o 8770
Posted: 09 May 2014 05:31
by alex12555
Hi,
you can use the 8082 in NOE Mode (like 4068) but you must R10.1.1 Patch 29 or later!
Before this, you can run only this Phone in SIP Mode.
For these two things one does not necessarily need the 8770!
Alex
Re: how to configure 8082 w/o 8770
Posted: 09 May 2014 07:17
by ainy
do you have a doc to refer to know how to configure with out using 8770
Re: how to configure 8082 w/o 8770
Posted: 09 May 2014 12:43
by cavagnaro
Just declare OXE as SIP proxy and in OXE create that extension and register on 8082
Re: how to configure 8082 w/o 8770
Posted: 09 May 2014 21:02
by oldboy
alex12555 wrote:Hi,
you can use the 8082 in NOE Mode (like 4068) but you must R10.1.1 Patch 29 or later!
Before this, you can run only this Phone in SIP Mode.
For these two things one does not necessarily need the 8770!
Alex
Alex, you need to be Release 11 for them to run in NOE mode, you also need binary 300 minimum to be able to switch to NOE mode.
Re: how to configure 8082 w/o 8770
Posted: 10 May 2014 04:31
by ainy
My OXE system release is 10.0 and and i need to how to configure My IC without 8770 software. Any useful document?
Re: how to configure 8082 w/o 8770
Posted: 10 May 2014 17:47
by cavagnaro
Like System documentation? There is no a specfic one for "ainy request"
Re: how to configure 8082 w/o 8770
Posted: 20 May 2014 14:07
by frank
Did you try
http://wiki.aappfactory.com ?
There is a wiki page about deploying with a web servers.