Page 1 of 1
user capacity for 93H IAP
Posted: 22 Apr 2014 08:07
by chuikingman
Hi,
Any one know the capacity of IAP 93 H ??
How many users can concurrently login one SSID wihtout error alert ???
I search the datasheet but it is not mention.
Please advice ...
Re: user capacity for 93H IAP
Posted: 22 Apr 2014 09:19
by devnull
AFAIK there is a (hardware) 256 user limit, but you must always think about bandwidth sharing: all Users share the uplink/airtime, broadcast clog the air aso..
it's more or less safe to calculate with 20-30 Users, but this is dependent on client "behavior".
i would do a test before rolling out a single 93H for 100 users..
Re: user capacity for 93H IAP
Posted: 22 Apr 2014 09:23
by chuikingman
Hi,
How to calculate from uplink bandwidth ... any example and assumption ??
Please mention example in detailed ...
Thank
Re: user capacity for 93H IAP
Posted: 22 Apr 2014 09:31
by devnull
Well you can't calculate without knowledge of the clients:
Imagine a client downloading HD Videostreams compared to on that writes an email now and than.
As the APs are labeled Aruba you can try search the net for some comparisions there
Re: user capacity for 93H IAP
Posted: 22 Apr 2014 21:56
by chuikingman
So, any recommend number of user log to ALU IAP H93 ??
Any these recommend figure ???
Please advice ...
Re: user capacity for 93H IAP
Posted: 07 May 2014 05:35
by chuikingman
Hi,
What situation will I find this error (max capacity )in IAP ...
I attach the screen capture ...I get it from IAP user guide ...
Please advice detailed ...
Thank
Re: user capacity for 93H IAP
Posted: 08 May 2014 23:35
by chuikingman
HI,
What condition and number of client will produce below alert
100105 Maximum capacity reached on OAW-IAP
The OAW-IAP has reached maximum capacity and cannot accommodate any more clients
I get this alert from the user guide ..
Please advice what number of client will trigger this alert .
Thank