Alcatel Unleashed

Dear all

I can not understand why log occurred.

I want to hear your ideas.

Thx

swlog _1 :

Apr 16 01:06:38 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931967.452)routerMACReqProcessing[3693][ADD] Router MAC 00:00:5e:00:01:d8 VLAN 216 GPORT -1
Apr 16 01:06:38 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931967.453)routerMACReqProcessing[3701]Router MAC 00:00:5e:00:01:d8 VLAN 216 is programmed to GPORT -1
Apr 16 01:06:38 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931967.453)routerMACReqProcessing[3681]Router MAC 00:00:5e:00:01:d8 VLAN 216 GPORT -1 existed, ignore
Apr 16 01:06:38 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931967.453)routerMACReqProcessing[3681]Router MAC 00:00:5e:00:01:d8 VLAN 216 GPORT -1 existed, ignore
Apr 16 01:06:38 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931967.453)routerMACReqProcessing[3681]Router MAC 00:00:5e:00:01:d8 VLAN 216 GPORT -1 existed, ignore
Apr 16 01:06:38 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931967.453)routerMACReqProcessing[3681]Router MAC 00:00:5e:00:01:d8 VLAN 216 GPORT -1 existed, ignore
Apr 16 01:06:39 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931968.724)routerMACReqProcessing[3693][DEL] Router MAC 00:00:5e:00:01:d8 VLAN 216 GPORT -1
Apr 16 01:06:39 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931968.725)routerMACReqProcessing[3693][DEL] Router MAC 00:00:5e:00:01:d8 VLAN 216 GPORT -1
Apr 16 01:06:39 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931968.726)routerMACReqProcessing[3693][DEL] Router MAC 00:00:5e:00:01:d8 VLAN 216 GPORT -1
Apr 16 01:06:39 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931968.726)routerMACReqProcessing[3693][DEL] Router MAC 00:00:5e:00:01:d8 VLAN 216 GPORT -1
Apr 16 01:06:39 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931968.727)routerMACReqProcessing[3693][DEL] Router MAC 00:00:5e:00:01:d8 VLAN 216 GPORT -1
Apr 16 01:07:38 10k local0.info swlogd: vrrp_0 timer info(5) VRRP toggled once in the last minute. VRID=216



swlog _2 :

Mar 15 04:24:14 OS10K local0.info swlogd: ChassisSupervisor Power Mgr info(5) PS 2 is up
Mar 15 16:34:53 OS10K local0.info swlogd: ChassisSupervisor Power Mgr info(5) PS 1 is up
Mar 16 06:15:48 OS10K local0.info swlogd: ChassisSupervisor i2cMgrHwThread info(5) I2C connectivity test requested
Mar 16 06:15:48 OS10K local0.info swlogd: ChassisSupervisor i2cMgrHwThread info(5) All switches accessible
Mar 16 06:15:48 OS10K local0.info swlogd: ChassisSupervisor i2cMgrHwThread info(5) All switches report OK
Mar 17 07:51:00 OS10K auth.info sshd[4063]: Accepted password for admin from 10.31.100.42 port 59701 ssh2

What Software are you running?

I have seen NO_CONSOLE messages with 7.3.3 on a 6900 when a failover occured andi have oppend a SR for that.

I would open a ticket!

Hi,

This messages in the swlog_1 are the MAC address adding and deleting messages:

Apr 16 01:06:38 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931967.452)routerMACReqProcessing[3693][ADD] Router MAC 00:00:5e:00:01:d8 VLAN 216 GPORT -1
Apr 16 01:06:38 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931967.453)routerMACReqProcessing[3701]Router MAC 00:00:5e:00:01:d8 VLAN 216 is programmed to GPORT -1
The above message tells that the MAC address 00:00:5e:00:01:d8 was added and mapped to vlan 216.

Apr 16 01:06:39 10k local0.info swlogd: slCmm GENERAL info(5) NO_CONSOLE:(9931968.724)routerMACReqProcessing[3693][DEL] Router MAC 00:00:5e:00:01:d8 VLAN 216 GPORT -1
the above giben message informes that the MAC address was removed from the MAC-address-table of the AoS software from vlan 216.

pr 16 01:07:38 10k local0.info swlogd: vrrp_0 timer info(5) VRRP toggled once in the last minute. VRID=216
The above given swlog message inform that the VRRP toggling is being observed. This toggling may be done due to several reason for e.g: STP issue, port issue, high cpu issue etc.

Mar 15 04:24:14 OS10K local0.info swlogd: ChassisSupervisor Power Mgr info(5) PS 2 is up
Mar 15 16:34:53 OS10K local0.info swlogd: ChassisSupervisor Power Mgr info(5) PS 1 is up
Mar 16 06:15:48 OS10K local0.info swlogd: ChassisSupervisor i2cMgrHwThread info(5) I2C connectivity test requested
Mar 16 06:15:48 OS10K local0.info swlogd: ChassisSupervisor i2cMgrHwThread info(5) All switches accessible
Mar 16 06:15:48 OS10K local0.info swlogd: ChassisSupervisor i2cMgrHwThread info(5) All switches report OK
These are hardware check messages regarding the power supply. Additionally, please be informed that the I2C messages are the messages exchanged between the NI and the CMM which are responsible for the hardware health checkups, SFP detection, CPU checkup etc.